Rationalising geological time

A diagram of the geological time scale

The Geologic Time Spiral: A Path to the Past. Designed by Joseph Graham, William Newman, and John Stacy. Get it from http://pubs.usgs.gov/gip/2008/58/

The Système International d’Unités (SI) is the agreed arbiter that defines the units in which phenomena are measured. There are 7 SI base units (length, mass, time, electric current, temperature, intensity of radiation and amount of substance) from which others are derived as they become necessary. Geoscientists have striven to comply, though not always happily. For instance the doubly-derived SI unit for pressure, the pascal (Pa) is a newton (derived unit of force) per square metre (N m-2), and in base units 1 kg m-1 s-2. The pascal replaced the long employed arbitrary unit, the kilobar (1 kb = 1000 x surface atmospheric or barometric pressure) one of which represents about 3.5 km depth in the earth. The reluctance to shift units is probably innate conservatism, for 1 kb = 100 MPa: simples!

Another problem has arisen as regards the SI base unit for time – the second. This is unwieldy for geological time, the Earth having formed approximately 1.435 x 1017 seconds ago. It’s not so handy for history either, about 3 x 1010 seconds having elapsed since William of Normandy won the Battle of Hastings.

The year is what we remember, but even that in a historical sense has its problems, for instance the BC/AD division where some scholars even dare to suggest that Christ was born in 4 BC. The more politically correct Common Era (CE) and Before the Common Era (BCE) of course don’t fool anyone. Interestingly, Wikipedia (en.wikipedia.org/wiki/Year) indicates, there are over ten current versions of a ‘year’ depending on context (for instance, astronomers favour the Julian year). Historical and thus geological time has the unnerving habit of continually getting longer, and it is a major problem to measure historical time precisely, either from increasingly vague records as one delves back in historical documents or because of the inherent imprecision in measuring radioactive isotopes and their daughter products that underpins archaeological and geological time. Archaeologists have a very hard time of it, for their workhorse is radiocarbon dating that depends on the production of radioactive 14C in the atmosphere by cosmic ray’s interaction with nitrogen. The rate of 14C production varies over time with the cosmic ray flux from extra-solar sources, and even worse, a very large amount was produced by testing nuclear weapons in the atmosphere in the mid 20th century. Abandoning the BC/AD division that lurks still with historians and archaeologists, geoscientists speak of time ‘before present’ (bp), which doesn’t matter a damn for geological Periods, Eras and Eons which are immensely long whatever the unit. But it does for the Holocene, mainly calibrated by radiocarbon methods: bomb-test production of 14C , which will linger about 50 thousand years before near-complete decay, has forced the ‘present’ to be set at 1950 AD!

So the year is here to stay, even though it is arbitrary and changes all the time, along with kilo, mega and giga prefixes for thousands, millions and billions of years. Yet teeth are now being ground over what the unit’s symbol should be (Biever, C. 2011. Push to define year sparks time war. New Scientist, v. 210 (30 April 2011), p. 10).  A task group of geoscientists and chemists set up by the International Union of Pure and Applied Chemistry, IUPAC, and the International Union of Geological Sciences, IUGS in 2006 have now defined the year – why chemists, you might wonder; they measure the radioactive decay constants of isotopes used in radiometric dating. The link to the SI system through the base unit of one atomic-standard second is to be standardised by the solar year; the time in seconds between one solstice and the next at the equator for year 2000: i.e. 3.1556925445 × 107 s (Holden, N.E. et al. 2011. IUPAC-IUGS common definition and convention on the use of the year as a derived unit of time (IUPAC Recommendations 2011). Pure and Applied Chemistry, v. 83, p. 1159-1162). It is to be called the annus (a), applied in ka, Ma or Ga to two usages of time, the time difference between ‘now’ and an event in the past, and the time difference between two events in the past. This dual usage of the same symbol is the source of the gnashing. Whereas Ma, for instance, was quite acceptably used for the measured age of a rock relative to the present, there are at least three schools of thought for other uses of time. Some have been quite happy to use Ma for measured age, a fixed time datum in the past such as the Precambrian-Cambrian boundary, and a time duration such as that of a geological Period or some major event such as an orogeny (that has been used in Earth Pages News since its outset). Others would distinguish between the first and the other two, as for instance Ma for the first and Myr for the other two. But there are variants, the symbol mya having been used for ‘million years ago’, and the international science journal Nature currently uses Myr for the first but now takes the safe path of using ‘million years’ for the other two. Nicholas Christie-Blick of Columbia University in New York is reported as having opined that the rationalisation to one-symbol-fits-all is a huge step backwards, and he is not alone; Science editorial staff will continue to demand of their authors a distinction between age and time span, since a switch would ‘confuse its readers’, long accustomed to that usage.

Also it is so easy to write, ‘the rock has an Ar-Ar age of 25 Ma’, ‘it took 25 Ma for this trilobite to disappear from the geological record’, and ‘about 25 Ma ago, there is a gap in the fossil record of primates’. I personally welcome the simplification, especially as it will encourage authors to write more nicely.


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s